IOC teams up with MCPI to set up a Rs1,000 crore polyester staple fibre unit in Odisha

MOSCOW (MRC) -- Indian Oil Corporation is teaming up with Chatterjee group arm, MCPI to set up a Rs 1,000 crore polyester staple fibre (PSF) unit in Odisha, as per Economictimes.

This is part of an overall investment drive taken up by the state government to attract big ticket investment in downstream units across industries in the state.

The unit is scheduled to come up on 200 acres at Dhamnagar in the state’s Bhadrak district. It will source raw material from Haldia in West Bengal and have a 108 kta (kilo tonnes per annum) PSF capacity. It will also produce 180 kta of drawn texture yarn (DTY) and 36 kta of full drawn yarn (FDY) mainly used as technical textiles, which find wide use in industrial textile and in the garments trade. This is the second such downstream petrochem facility in the state, where IOC is also setting up a plastic park at Paradip close to its refinery.

“We are reaching out to potential investors in West Bengal and across the country, offering them an opportunity to set up downstream units in these industrial parks,” Odisha’s principal secretary (industries department) Sanjeev Chopra said. The state government officials who are on a roadshow in the city, said they received good response from prospective investors. A similar roadshow is being planned to be held in Mumbai next month.

Odisha, which is among the few states that allow private investors to set up industrial parks, has decided to provide all necessary infrastructure be it road, water and electricity connection right up to the gates. It is also providing 50 per cent subsidy on the infrastructure inside the park.

Odisha officials also met Engineering Exports promotion Council (EEPC) officials and some 20-odd representatives of forging and casting units based in Howrah to attract them in setting up units in the state. As part of Odisha’s Vision Document 2030, the target is to achieve 50 per cent value addition of primary metal produced within the state from the current level of 10 per cent, Chopra said.

“While metal majors like Hindalco, National Aluminium (Nalco), Jindal Stainless, JSPL, Tata Steel or Vedanta have a manufacturing presence in our state, we have till now not had much success with downstream units in metal based industries. We have now decided to address this issue and are aiming at a raising the level of conversion of this primary metal into value added products within the state,” Chopra said.
MRC

Meridian signs Letter of Intent with leading EPC provider for Davis Refinery in North Dakota

MOSCOW (MRC) -- Meridian Energy Group, Inc., the leading developer of innovative and environmentally-compliant oil refining facilities, has announced that it has signed a letter of intent with a leading specialty engineering, procurement and construction solutions provider based in Houston, Texas, to initially complete a front end engineering and design (FEED) study for the Davis Refinery in Belfield, North Dakota, as per Hydrocarbonprocessing.

Additionally, the LOI establishes the terms and conditions under which Meridian would contract with the Contractor for the EPC of the initial phase of the Davis Refinery, the negotiation of which is anticipated to occur during the FEED study.

This LOI represents a major milestone for Meridian and comes at a critical point in time as Meridian prepares to receive the final issuance of the permit to construct for the Davis Refinery from the North Dakota Department of Health the coming weeks. The Contractor is the largest specialized infrastructure solutions provider in North America and has met all Meridian criteria for a forward-thinking EPC contractor that understands the significance of the Davis Refinery on the future of the refining industry. Meridian is confident that the Contractor is an ideal EPC partner to carry out and implement the detailed design and engineering of the Davis Refinery and the standard of emission controls the facility will set for the refining industry moving forward.

William Prentice, CEO of Meridian Energy Group said of the LOI, "With our PTC being finalized by NDDoH over the next few weeks, the single most important milestone left for Meridian to achieve was the selection of our EPC partner for the Davis Refinery. The Contractor we have selected to be our EPC partner is exceptionally well-qualified, and fully appreciates how unique and important the Davis Refinery is in defining the future of the refining industry in the United States. Now that this important relationship has been established, Meridian can finalize its project financing arrangements for the Davis Refinery upon award of the final PTC and begin construction shortly thereafter."
MRC

HDPE production in Russia increased by 5% in January-April 2018

MOSCOW (MRC) - Russia's production of high density polyethylene (HDPE) was about 327,900 tonnes in January-April 2018, up 5% year on year. Not all producers increased production volumes over the reported period, according to MRC ScanPlast.

April production of HDPE in Russia increased to 92,500 tonnes, whereas a month earlier this figure did not exceed 80,800 tonnes. The increase in production volumes was a result of the resumption of HDPE production at Nizhnekamskneftekhim. Overall HDPE output reached 327,900 tonnes in the first four months of 2018, compared to 312,300 tonnes a year earlier.

Structure of PE production over the reported period looked as follows.
Russia's April HDPE production at Kazanorgsintez decreased to 40,900 tonnes from 44,600 tonnes a month earlier. The Kazan plant's overall HDPE production was 171,500 tonnes in January-April 2018, up by 4% year on year.

Stavrolen also reduced output of HDPE last month, the final figure was 25,800 tonnes against 27,000 tonnes in March. The plant's HDPE output reached 102,100 tonnes in January-April 2018, up 12% year on year.

Gazprom neftekhim Salavat increased capacity utilisation in April after a short scheduled shutdown in March, with about 11,100 tonnes produced in April, compared with 8,700 tonnes in March. Total HDPE production at the plant reached 39,100 tonnes in January-April 2018, up 25% year on year.

Nizhnekamskneftekhim switched to linear low density polyethylene (LLDPE) production in the early November 2017, and continued to produce it until early April. Total HDPE production at Nizhnekamskneftekhim was 15,200 tonnes in January-April 2018 against 10,700 tonnes year on year.


MRC

Braskem begins operation in Boston to strengthen its renewable chemicals strategy

MOSCOW (MRC) -- Braskem, the largest thermoplastics resins producer in the Americas and the worldwide leader in bio-polymers, has announced its has expanded focus on the research, development and commercialization of chemicals and materials sourced from renewable feedstocks, as per the company's press release.

Braskem started a new operation in Boston focused on leveraging groundbreaking developments in biotechnology and advanced materials. The activities will include biotechnology and material science R&D, business and market development as well as technology scouting for key strategic partnerships.

Gustavo Sergi, Braskem Renewable Chemicals Business Director, stated, "Renewable chemistry will lead the next wave of development in chemicals and polymers. Our announcement today reinforces Braskem's position at the forefront of this movement. As we look forward, by developing and leading the next wave of renewable chemicals and polymers, we are bringing our customers new and innovative choices."

"The operation in Boston will complement the metabolic engineering capabilities that we have in our Renewable Chemistry Research Center in Campinas (Brazil) as well as our material science competencies present in our R&D centers in Triunfo (Brazil) and Pittsburgh (USA). In addition, this location positions Braskem in a strategic ecosystem that will enable us to leverage key partnerships for research and market development," explains Mateus Schreiner Garcez Lopes, Braskem Head of Innovation in Renewable Technologies.

To lead the R&D initiatives in Boston the company has appointed Dr. Daniel P. MacEachran as new Head of Metabolic Engineering. Dr. MacEachran joins Braskem from Greenlight Biosciences, Inc., a privately-held biotechnology company focused on the sustainable production of chemicals, having most recently served as Director of Applications Research & Development. He also served as a Visiting Scientist and Post-Doctoral Researcher to the Department of Biology at the Massachusetts Institute of Technology.

As MRC wrote previously, in October 2017, Petrobras’s (Rio de Janeiro) minority stakes in Braskem and Deten Quimica were excluded from Petrobras’s divestment program, according to a government decree. The decree prevents Petrobras from immediately selling its minority stake in Braskem, which had been announced last year. A new decree will be required to release the stock sale.

Braskem S.A. produces petrochemicals and generates electricity. The Company produces ethylene, propylene, benzene, toluene, xylenes, butadiene, butene, isoprene, dicyclopentediene, MTBE, caprolactam, ammonium sulfate, cyclohexene, polyethylene theraphtalat, polyethylene, and polyvinyl chloride (PVC). Braskem exports to clients in approximately 100 countries and operates 41 industrial units, which are located in Brazil, United States, Germany and Mexico, the latter in partnership with the Mexican company Idesa.
MRC

Shell Lubricants unveils the 'Power of Partnerships' campaign

MOSCOW (MRC) -- Shell Lubricants, the global market leader in finished lubricants, launched 'Power of Partnerships' in Mumbai, to encourage industry collaboration and harness relationships to achieve operational efficiency together, as per Hydrocarbonprocessing.

The campaign is an extension of 'Together, Anything is Possible' (TAIP), the first global brand positioning for Shell B2B Lubricants, introduced last year. Moving forward from TAIP, which first introduced the concept of reducing 'Total Cost of Ownership' (TCO), 'Power of Partnerships' aims to demonstrate the significance of powerful collaborations in advancing industries and helping companies overcome their challenges now and in the future.

Highlighting the message of forging strong alliances, Shell launched 'The Bat Doctor' video, featuring Mr. Ram Bhandari, a celebrity bat doctor, who has made bats for cricketers like Sachin Tendulkar, Sourav Ganguly and Rahul Dravid, to name a few. The video demonstrates the importance of striking the right partnerships across situations to brew a solution for success; just as the cricketers' bats were instrumental to their own.

As part of its renewed focus on building greater collaboration with customers, Shell Lubricants undertook a study to understand lubrication practices in the manufacturing and construction sectors in India. Findings reveal that India'smanufacturers are engaged and optimistic about Industry 4.0 technologies, with 46% of those surveyed anticipating that the resulting savings could exceed INR 33 million. India's construction companies on the other hand recognise the benefits of a proactive maintenance approach but are not necessarily succeeding in its implementation. 86% of those surveyed believe that effective equipment maintenance can lead to cost savings, but 82% still feel that maintenance is often deprioritised until there is a breakdown. An absence of senior management engagement in the importance of maintenance has come to light as one barrier to effective preventative action.

The findings shed significant light on lack of expertise, third-party support combined with under-resourced teams, hindering the widespread uptake of new technologies and effective lubrication practices. There are also concerns about the implications on Total Cost of Ownership (TCO) with majority companies expecting TCO to increase as a result of introducing new technologies.
MRC