ABS import to Belarus up by 5% in Jan-Aug 2019

MOSCOW (MRC) -- Overall imports of acrylonitrile-butadiene-styrene (ABS) to the Belarusian market rose in the first eight months of 2019 by 5% year on year to 4,600 tonnes, according to MRC's DataScope report.

This figure was 4,400 tonnes in January-August 2018.

Shipments of Russian material to Belarus fell in the first eight months of 2019 by 29% year on year.


August ABS imports to Belarus decreased by 26% year on year.

Thus, imports of material into the country were 533 tonnes over the stated period versus 720 tonnes in August 2018.

South Korea with an import share of 49% (260 tonnes) and Russia with 32% of the total imports (138 tonnes) were the key ABS suppliers to the Republic of Belarus in August.

At the same time, imports of Russian material into Belarus slumped in August by 62% year on year.

MRC

GPPS and HIPS imports to Belarus up by 13% in Jan-Aug 2019

MOSCOW (MRC) -- Overall imports of general purpose polystyrene (GPPS) and high impact polystyrene (HIPS) to Belarus rose in the first eight months of 2019 by 13% year on year to 25,400 tonnes, according to MRC's DataScope report.

This figure was 22,400 tonnes in January-August 2018.


GPPS and HIPS imports from Russia into the country accounted for 81% of the total imports in the first eight months of 2019 or 20,600 tonnes, up by 2,800 tonnes year on year.

Imports of material to the Belarusian market grew in August by 20% year on year to 3,600 tonnes from 3,000 tonnes a year earlier. August GPPS and HIPS shipments into the country rose by 7% from July 2019 (3,300 tonnes).

August 2019 imports of Russian material into Belarus increased by 22% year on year to 2,900 tonnes from 2,400 tonnes a year earlier, July 2019 shipments were 2,800 tonnes.

MRC

Ulsan PP breaks ground on new polypropylene facility in South Korea

MOSCOW (MRC) -- LyondellBasell (LBI) has announced that Ulsan PP Co., Ltd., a joint venture between PolyMirae Company Ltd, a 50-50 partnership of LyondellBasell and Daelim, and SK Advanced broke ground in the southeastern port city of Ulsan, South Korea, as per LBI's press release.

This new plant will utilize LyondellBasell’s world leading fifth generation Spheripol technology and is expected to begin production in May 2021. With its 400 kiloton annual capacity, the facility will be one of the largest polypropylene plants of its kind in Asia.

"Joint ventures are an important part of our growth strategy to reach the global market," said Ken Lane, executive vice president of Global Olefins & Polyolefins (O&P) at LyondellBasell. "With the combined advantages of LyondellBasell, Daelim and SK Advanced, this new joint venture will be able to provide competitive and differentiated polypropylene products that help advance fuel efficient vehicles, flexible packaging solutions, clean water and high-quality hygiene to serve the rapidly growing markets in Asia."

The Ulsan PP plant will leverage a vertically integrated value chain of SK, converting propane supplied by SK Gas to propylene by SK Advanced and finally to polypropylene with LyondellBasell’s leading Spheripol PP process technology. Through this integrated value chain approach, the companies will enhance the stable supply of raw materials, operational efficiency and responsiveness to market changes.

PolyMirae will offtake all polypropylene produced by Ulsan PP which will be sold to customers in South Korea through PolyMirae and exported throughout Asia through LyondellBasell and Daelim, utilizing their superior market knowledge and expertise.

As MRC informed before, in September 2019, LyondellBasell sarted up a new, fifth production line at its polypropylene compounding plant in Knapsack, Germany capable of producing 25 kt/yr. With this, capacity of the Knapsack facility is over 200 kt/yr, making the site "the world’s largest polypropylene compounding facility".

According to MRC's ScanPlast report, the PP consumption in the Russian market was 909,260 tonnes in January-August 2019, up by 10% year on year. Shipments of PP block copolymer and homopolymer PP increased.

Ulsan PP Co., Ltd. is a joint venture between PolyMirae and SK Advanced. Established in November 2018, the company is headquartered in the new port of Hwangseong-dong, Namsan-gu, Ulsan, South Korea.

PolyMirae is a 50-50 joint venture between Daelim and LyondellBasell, both of which are well respected companies worldwide, and is a leading polypropylene production company in Korea. With Daelim's outstanding accumulated on-site operational experience and LyondellBasell's core technologies and worldwide sales network, PolyMirae was founded on September 1st 2000 in order to produce and supply the best polypropylene in Asia.

Daelim Industrial is a construction and petrochemical company that is a part of the Daelim Group hailing from South Korea. Daelim builds petrochemical, refinery and power plants in more than 36 countries. With headquarters in Seoul, South Korea, Daelim completed more than 600 engineering and construction projects around the world, as well as operates manufacturing facilities in South Korea. Founded in 1939, Daelim has approximately 7,000 employees worldwide. Revenues for 2018 is USD10 billion.

SK Advanced is a joint venture between Korea’s SK Gas, Saudi Arabia’s APC and Kuwait’s PIC, a subsidiary of Kuwait’s state-run oil company, Kuwait Petroleum Company (KPC). SK Advanced won the Industrial Peace Prize of Ulsan city for its efforts to maintain an accident-free workplace and build excellent labor-management relations since 2016.
l
LyondellBasell is one of the largest plastics, chemicals and refining companies in the world. Driven by its 13,000 employees around the globe, LyondellBasell produces materials and products that are key to advancing solutions to modern challenges like enhancing food safety through lightweight and flexible packaging, protecting the purity of water supplies through stronger and more versatile pipes, and improving the safety, comfort and fuel efficiency of many of the cars and trucks on the road. LyondellBasell sells products into approximately 100 countries and is the world's largest licensor of polyolefin technologies.
MRC

BP plans to build a USD25 million pilot plastics-to-feedstocks plant in US

MOSCOW (MRC) -- BP plans to build a USD25 million pilot plant to test new technology the energy company says will allow plastic bottles and food packaging to be recycled again and again, reported Reuters.

Polyethylene terephthalate, or PET, is one of the most widely recycled plastics. About 27 million tonnes of PET is used annually in packaging, with bottles accounting for around 23 million tonnes of that, BP said in a statement, citing data from consultancy Wood Mackenzie.

However, only around 60% of PET used for bottles is recovered, with the vast majority recycled only once before being either buried in landfill or burnt as the current recycling process leaves a lot of impurities.

BP said that its new recycling technology, named Infinia, can transform used PET plastics into brand-new plastic feedstock, allowing them to be recycled repeatedly.

The company will build a USD25 million plant in the United States in 2020 to test the technology before deciding on whether it can be fully commercialised.

BP's head of refining and petrochemicals Tufan Erginbilgic said the technology was a "game-changer" for the plastics recycling industry.

"It is an important stepping stone in enabling a stronger circular economy in the polyester industry and helping to reduce unmanaged plastic waste," Erginbilgic said.

As MRC informed earlier, BP and China’s Zhejiang Petroleum and Chemical Corporation (ZPCC) have signed a memorandum of understanding (MOU) to explore the creation of a new equally-owned joint venture to build and operate a 1 million ton per year (Mtpy) acetic acid plant in eastern China. The proposed facility - in Zhoushan, Zhejiang Province - would deploy BP’s CATIVA XL technology to produce acetic acid, a versatile intermediate chemical used in a variety of products such as paints, adhesives and solvents. It is also used in the production of purified terephthalic acid (PTA) of which BP is a leading global manufacturer.

BP’s Global Petrochemicals Business has total (net to BP) capacity at 18 locations in ten countries of 18.3 million tpa including 6.7 million tpa of PTA.

According to MRC's DataScope report, Chinese bottle grade PET deliveries to Russia increased 34% in the first eight months of 2019 to 95,600 tonnes. China accounted for 90% of the total imports, compared to 85% a year earlier.
August imports of material from China decreased by 41% to 7,600 tonnes from 12,800 tonnes in July. Jiangsu Sanfangxiang, Yisheng, Wankai and Sinopec were the leading Chinese suppliersof material to the Russian market.

BP is one of the world's largest oil and gas companies, serving millions of customers every day in around 80 countries, and employing around 85,000 people. BP’s business segments are Upstream (oil and gas exploration & production), and Downstream (refining & marketing). Through these activities, BP provides fuel for transportation; energy for heat and light; services for motorists; and petrochemicals products for plastics, textiles and food packaging. It has strong positions in many of the world's hydrocarbon basins and strong market positions in key economies.
MRC

Thai PTTGC runs HDPE plant on reduced ops, LDPE plant remains offline

MOSCOW (MRC) -- PTTGC has shut all high density polyethylene (HDPE) production lines except keeping only one line on normal production at present, reported NCT with reference to sources close to the company.

Located in Map Ta Phut, Thailand, the company’s HDPE plant includes four production lines with a combined capacity of 330,000 tons/year.

The source also said that the producer conducted a test run at its 300,000 tons/year low density polyethylene (LDPE) plant, adding that the plant was not yet ready to start production. The plant, shut in early October for maintenance, currently remains offline with no definite restart schedule.

As MRC informed earlier, PTT started commercial operations at its new 400,000 mt/year metallocene C6 linear low density polyethylene plant at Map Ta Phut, Thailand, in the first quarter of 2018.

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 1,436,390 tonnes in the first eight months of 2019, up by 9% year on year. Shipments of all PE grades increased.

PTT Global Chemical is a leading player in the petrochemical industry and owns several petrochemical facilities with a combined capacity of 8.45 million tonnes a year.
MRC