GCM to market PP for HMC Polymers in key CLMVI markets in SE Asia

MOSCOW (MRC) -- GC Marketing Solutions Co. (GCM) and HMC Polymers have entered into an agreement for the distribution of HMC's polypropylene (PP) products by GCM in key markets of Cambodia, Laos, Myanmar, Vietnam and Indonesia (CLMVI), according to Apic-online.

"The agreement to market state-of-the-art PP from HMC adds a vital category to the broad-based polymer portfolio offered by GCM and provides HMC with the benefit of GCM's presence and reach across the region," HMC noted.

GCM, formerly PTT Polymer Marketing Co., is a subsidiary of PTT Global Chemical (PTTGC).

As MRC wrote before, PTTGC had fully restarted its No. 2 cracker in Map Ta Phut this week after a planned turnaround by end-February, 2020. The cracker was shut for maintenance on January 20, 2020. Located at Map Ta Phut, Thailand, the No. 2 cracker has an ethylene production capacity of 400,000 mt/year.

The company also operates No. 1 cracker at the same site with a capacity of 515,000 tonnes of ethylene and 310,000 tonnes of propylene per year, which was also shut on 23 January, 2020, for a 40-day turnaround.

Ethylene and propylene are feedstocks for producing polyethylene (PE) and polypropylene (PP).

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 383,760 tonnes in the first two month of 2020, up by 14% year on year. High density polyethylene (HDPE) and linear low density polyethylene (LLDPE) shipments increased due to the increased capacity utilisation at ZapSibNeftekhim. At the same time, PP shipments to the Russian market were 192,760 tonnes in January-February 2020, down by 6% year on year. Homopolymer PP accounted for the main decrease in imports.

PTT Global Chemical is a leading player in the petrochemical industry and owns several petrochemical facilities with a combined capacity of 8.45 million tonnes a year.
MRC

COVID-19 - News digest as of 08.04.2020

1. Coalition ramps up face shields output in response to Covid-19

MOSCOW (MRC) -- A coalition initiated by 3D printing company Stratasys (Eden Prairie, Minnesota / USA) is ramping up production of disposable face shields for use by medical personnel in response to the Covid-19 pandemic, said Plasteurope. Stratasys said the number of companies and universities involved in the coalition now exceeds 150 and members include Toyota, Boeing and medical technology company Medtronic (Minneapolis, Minnesota). Requests from hospitals and other organisations for the shields, which include a 3D-printed frame and a clear plastic shield covering the entire face, now exceed 350,000 shields.


MRC

ExxonMobil reduces 2020 capex by USD10 billion due to coronavirus pandemic

MOSCOW (MRC) -- ExxonMobil will reduce 2020 capital spending by 30% and lower cash operating expenses by 15% in response to low commodity prices resulting from oversupply and demand weakness from the coronavirus disease 2019 (COVID-19) pandemic, reported Chemweek.

Capital investments for 2020 are now expected to be about USD23 billion, down from the previously announced USD33 billion.

The largest share of the capital spending reduction will be in the Permian Basin, but expansion plans for some chemical projects will also be adjusted. “Timing of expansion plans for select downstream and chemical facilities across the company’s portfolio will be adjusted to capture efficiencies, slow spending pace, and better align with a return in commodity demand,” ExxonMobil said. It did not specify which chemical projects would be affected.

ExxonMobil’s planned major chemical projects include a joint venture cracker complex with Sabic near Corpus Christi, Texas, that is scheduled for start-up in 2022 and a cracker complex in Guangdong, China, where start-up was planned for 2023. Major derivative projects included a 450,000-metric tons/year polypropylene unit at Baton Rouge, Louisiana, scheduled for 2021, as well as a 450,000-metric tons/year propylene-based elastomers plant and 350,000-metric tons/year linear alpha olefins unit at Baytown, Texas, with expected start-up in 2022.

"While COVID-19 has had a significant impact on the global economy, we are confident that trade, transportation, and manufacturing will recover," said Darren Woods, ExxonMobil chairman and CEO."“ExxonMobil continues to invest in the projects that will position us to support economic recovery and capture value for our shareholders."

The company said it is “maximizing production of products critical to the global response, including isopropyl alcohol, which is used to manufacture hand sanitizer, and polypropylene, which is used to make protective masks, gowns, and wipes.” ExxonMobil said it is also supporting efforts to redesign and accelerate production of reusable face masks and shields to help alleviate the shortage for medical workers and first responders.

Globally, ExxonMobil anticipates industry refinery output will decline in line with demand and available storage, and it will maintain the ability to return to normal operations as demand recovers.

"The long-term fundamentals that underpin the company’s business plans have not changed—population and energy demand will grow, and the economy will rebound," Woods said. "Our capital allocation priorities also remain unchanged. Our objective is to continue investing in industry-advantaged projects to create value, preserve cash for the dividend, and make appropriate and prudent use of our balance sheet."

As MRC wrote before, ExxonMobil Corp has shut the small gasoline-producing unit at its 560,500 barrels-per-day (bpd) Baytown, Texas, refinery because of low demand due to efforts to halt the spread of the coronavirus pandemic. The shutdown of the 90,000 bpd gasoline-producng fluidic catalytic cracker 2 (FCC 2) happened in late March, 2020.

We also remind that, in September 2019, ExxonMobil announced plans to spend GBP140 million over the next two years in an additional investment program at its Fife ethylene plant, which has a capacity of more than 800,000 t/y.

Ethylene and propylene are feedstocks for producing polyethylene (PE) and polypropylene (PP).

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 383,760 tonnes in the first two month of 2020, up by 14% year on year. High density polyethylene (HDPE) and linear low density polyethylene (LLDPE) shipments increased due to the increased capacity utilisation at ZapSibNeftekhim. At the same time, PP shipments to the Russian market were 192,760 tonnes in January-February 2020, down by 6% year on year. Homopolymer PP accounted for the main decrease in imports.

ExxonMobil is the largest non-government owned company in the energy industry and produces about 3% of the world's oil and about 2% of the world's energy.
MRC

India to continue prompt fuel exports for at least two more weeks

MOSCOW (MRC) -- Indian refiners are likely to continue prompt export of refined fuels for at least another two weeks to avoid a complete shutdown after the coronavirus lockdown hit local demand, reported Reuters with reference to company officials' statement.

A three-week lockdown due to end in mid-April slashed state fuel retailers’ local diesel sales by about 26% and petrol by about 17% in March, provisional data shows.

Indian Oil Corp, Bharat Petroleum Corp and Hindustan Petroleum Corp control about 90% of fuel pumps in India, where falling fuel consumption has deepened crude refining cuts by state refiners.

Some have declared force majeure on crude purchases as storage facilities are full.

India’s fuel consumption is expected to recover over the next 10-15 days as recent steps by the government, including movement of trucks to carry non-essential items will push up demand, R. Ramachandran, head of refineries at BPCL, said.

BPCL’s average crude processing has declined to 60%, from 90% reported on March 24, he said, adding:

"In order to operate the refineries above the turndown levels and to balance the refinery runs and the inventory build up, it is essential for us to look at selective exports."

Indian state refiners rarely export gasoil and HPCL and Mangalore Refinery and Petrochemicals Ltd sporadically export gasoline.

In a rare move, the country’s top refiner IOC recently issued tenders to export more than 50,000 tonnes of gasoline and some reformate for April loading.

"It will be difficult to operate in this situation for too long ... we may have to shut one or two refineries if demand doesn’t recover," said Sanjiv Singh, chairman of Indian Oil Corp . Another company official said IOC’s 11 refineries are operating at about 50% capacity, compared to 70%-75% previously reported.

"It is better to shut the plant than operating below 30%-35% capacity ... refinery is a critical plant," the source, who did not wish to be identified, told Reuters.

Private refiner Nayara Energy, part-owned by Russian oil giant Rosneft, which usually exports naphtha and gasoline, has also offered reformate for April lifting.

MRPL has issued tenders to export 130,000 tonnes diesel and 25,000 tonnes of gasoline in April.

"India’s April gasoil exports have accumulated to 900,000 tonnes, excluding the exports from Reliance. So, with those of Reliance combined, we expect April exports will be at a record high," an Asian trader said.

MRPL has reduced its crude refining to 50% from a previously reported cut of 33%, its managing director M. Venkatesh said.

"We are trying our best not to export prompt cargoes, but for the next one to two weeks it will be like this," he added.

As MRC informed previously, Indian Oil Corp restarted operation at its naphtha cracker in India in early-October, 2019. The cracker was shut in early-September, 2019 for a maintenance turnaround. Located in Panipat, in the northern Indian state of Haryana, the cracker has an ethylene production capacity of 857,000 mt/year and propylene capacity of 425,000 mt/year.

Ethylene and propylene are feedstocks for producing polyethylene (PE) and polypropylene (PP).

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 383,760 tonnes in the first two month of 2020, up by 14% year on year. High density polyethylene (HDPE) and linear low density polyethylene (LLDPE) shipments increased due to the increased capacity utilisation at ZapSibNeftekhim. At the same time, PP shipments to the Russian market were 192,760 tonnes in January-February 2020, down by 6% year on year. Homopolymer PP accounted for the main decrease in imports.
MRC

Nizhnekamskneftkehim reduces significantly April PS prices for Russian market

MOSCOW (MRC) -- Nizhnekamskneftekhim (part of TAIF group) has reduced its April selling polystyrene (PS) prices by Rb10,000/tonne, according to the ICIS-MRC Price report.

Thus, general purpose polystyrene (GPPS) for injection moulding and extrusion was offered at Rb76,000-80,000/tonne, whereas high impact polystyrene (HIPS) - at Rb80,000-84,000/tonne CPT Moscow, including VAT.

Traders reduced their prices of material by Rb12,000/tonne for some customers, and prices came close to the lower price range. A major trader offered GPPS at Rb76,500-77,500/tonne CPT Moscow, including VAT, and HIPS - at Rb80,500-81,500/tonne CPT Moscow, including VAT.

Demand has been subsiding rapidly in the construction segment of the Russian PS market. Buyers reduced their orders for April purchasing of material from some traders by half. A number of small- and medium-sized converters were forced to temporarily suspend production because of the tightening of the quarantine conditions. Demand for finished products remained strong in the food packaging segment.

PJSC "Nizhnekamskneftekhim" (NKNKh) is one of the largest Russian manufacturers of petrochemical products. The industrial complex of the company includes ten major production plants and ten departments (Railway Transport, Ethylene pipelines, etc..). NKNKh produces more than 120 types of chemical products, including synthetic rubber, polyethylene, polypropylene, polystyrene, surfactants. Nizhnekamskneftekhim is a member of TAIF Group.
MRC