London +4420 814 42225
Moscow +7495 543 9194
Kiev +38044 599 2950
info@mrcplast.com

Our Clients

Order Informer

 
Home > News >
 

Westlake Chemical declares force majeure on VCM, PVC after Hurricane Laura

September 03/2020

MOSCOW (MRC) --  Westlake Chemical declared force majeure Aug. 31 on North American polyvinyl chloride (PVC) and upstream vinyl chloride monomer (VCM), with widespread power outages and damage at its Lake Charles, Louisiana, complex leaving production offline for an indefinite amount of time, according to a letter to customers S&P Global  obtained.

"At this time, we are not able to predict the duration of this force majeure condition," the Westlake's letter dated Aug. 31 said.

"This force majeure condition will cause supply disruptions and limit our ability to meet anticipated product demand. While this force majeure event declaration is required at this time, Westlake/Axiall is continuing to work on commercial options to lessen the impact on our customers."

Market participants expected the declaration. Westlake's shutdown of its Lake Charles complex has idled 38% of its US VCM production with two VCM plants with a combined capacity of 952,318 mt/year offline.

The complex also has three upstream chlor-alkali plants with a combined capacity of 1.27 million mt/year of chlorine and 1.36 million mt/year of caustic soda - 46% of the company's overall North American chlor-alkali capacity.

The company said on Aug. 27, hours after Hurricane Laura came ashore with 150 mph winds, that it appeared its Lake Charles complex had "incurred limited physical damage."

Spokeswoman Erika Soechting reiterated that assessment in an email Aug. 31, before the FM letter began circulating, that restarts would primarily depend on the availability of electric power, industrial gases, and other feedstocks.

However, a source familiar with company operations said wind damage appeared to be more serious than initially thought upon further assessments. No further detail was available.

Westlake's FM will sharply tighten already tight PVC availability.

Formosa Plastics Aug. 14 declared FM on PVC at both its Texas and Louisiana complexes because a turnaround at its 736,000 mt/year chlor-alkali plant in Point Comfort, Texas, lasted longer than expected. Even though the chlor-alkali plant had restarted the week of Aug. 10, the company's downstream ethylene dichloride reserves were depleted, reducing its ability to produce adequate PVC further downstream.

Formosa's FM remained in place Aug. 31 as the company worked to replenish those EDC reserves and restore normal PVC output.

Export PVC availability already had been tight with Formosa's chlor-alkali turnaround that started in mid-June and a turnaround at its 513,000 mt/year PVC plant in Baton Rouge, Louisiana, in July.

In addition, domestic PVC demand has strengthened significantly since catering in April amid widespread coronavirus pandemic-related shutdowns.

Formosa and Westlake already had not expected to offer export volumes for September - Formosa because of its FM, and Westlake because of domestic demand. US PVC producers also had not resumed fully normal rates since reducing output in April, with chlor-alkali rates at 75% in July.

As MRC reported earlier, in February 2018, as MRC informed before, Westlake Chemical announced plans to expand its capacities for the production of PVC and VCM at three of its chemical facilities. Two of the plants are located in Germany (Burghausen, Gendorf) and one is located in Geismar, Louisiana. The expansions in Burghausen and Geismar are expected to be completed in 2019. The Gendorf expansions are expected to be completed in 2020 and 2021.

According to MRC's DataScope report, imports of suspension polyvinyl chloride (SPVC) into Russia totalled 13,800 tonnes in the first half of 2020, up by 5% year on year, whereas exports grew by 7% year on year.

Westlake Chemical Corporation is an international manufacturer and supplier of petrochemicals, polymers and building products with headquarters in Houston, Texas. The company's range of products includes: ethylene, polyethylene, styrene, propylene, chlor-alkali and derivative products, PVC suspension and specialty resins, PVC Compounds, and PVC building products including siding, pipe, fittings and specialty components, windows, fence, deck and film.


mrcplast.com
Author:Margaret Volkova
Tags:PVC, vinilhlorid, kausticheskaya soda, SPVC, Formosa, Westlake Chemical, Germany, Russia, USA.
Category:General News
|
| More

Leave a comment

MRC help

 


 All News   News subscribe