LyondellBasell grants 400 KTA Hostalen ACP License to Shandong Jinhai Chemical

MOSCOW (MRC) -- LyondellBasell, the world’s largest licensor of polyolefin technologies, announced that Shandong Jinhai Chemical Co., Ltd. will use the LyondellBasell Hostalen "Advanced Cascade Process" (Hostalen ACP) technology for a new facility, said Hydrocarbonprocessing.

The process technology will be used for a 400 KTA high density polyethylene (HDPE) facility to be built in Heze City, Shandong Province, P.R. China.

“Products from the Hostalen ACP process fits best the growing market need for applications requiring multi-modal HDPE resins,” said Neil Nadalin, Director of Licensing at LyondellBasell. Nadalin added: “This is our second license with Shandong Dongming Petrochemical Group with a 200 KTA Spheripol polypropylene line already awarded in 2017. This new license confirms once again the trust investors and operators place in our leading polyolefin expertise.“

Mr.Ding Shu Bing, Vice President of Shandong Dongming Petrochemical Group stated: “Selecting LyondellBasell’s Hostalen ACP technology for our project will enable us to produce on a reliable and economical basis high-quality, strong and long-lasting products such as PE pipes, film and many other applications enhancing peoples day to day live.“

With these new capacity additions, LyondellBasell has licensed over 8000 KTA of benchmark multi-modal HDPE resins.

The Hostalen ACP low-pressure slurry process technology manufactures high performance, multi-modal HDPE resins with an increased stiffness/toughness balance, impact resistance and high stress cracking resistance used in pressure pipe, film and blow molding applications.

The Shandong Jinhai HDPE plant will commence operations using Avant Z501 and Avant Z509 catalysts to produce a full range of multi-modal HDPE products.

New licensees can take advantage of LyondellBasell’s in-house expertise of continuous process, operating and product improvements by optionally joining our Technical Service program.

Ethylene and propylene are feedstocks for producing polyethylene (PE) and polypropylene (PP).

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 1,724,670 tonnes in the first ten months of 2019, up by 7% year on year. Shipments of all PE grades increased. The estimated PP consumption in the Russian market in January-October 2019 totalled 1,066,520 tonnes, up by 7% year on year. Supply of block copolymers of propylene (PP block copolymer) and homopolymer of propylene (homopolymer PP) increased, demand for statistical copolymers (PP random copolymer) decreased.

LyondellBasell is one of the largest plastics, chemicals and refining companies in the world. Driven by its 13,000 employees around the globe, LyondellBasell produces materials and products that are key to advancing solutions to modern challenges like enhancing food safety through lightweight and flexible packaging, protecting the purity of water supplies through stronger and more versatile pipes, and improving the safety, comfort and fuel efficiency of many of the cars and trucks on the road. LyondellBasell sells products into approximately 100 countries and is the world's largest licensor of polyolefin technologies.
MRC

MOSCOW (MRC) -- Wanhua Chemical Group has disclosed plans for a second ethylene cracker project at its Yantai, China, site with local government officials, reported Chemweek.

The project will include a 1.2-million metric tons/year (MMt/y) ethylene unit; pyrolysis gasoline hydrogenation; aromatics extraction; and production facilities for butadiene, high-density polyethylene (HDPE), low-density (LDPE), PE plastomers and elastomers, polypropylene (PP), and other derivatives. Timing and other details were not disclosed. The second ethylene project will use naphtha and C4s as feedstock.

Wanhua's first ethylene project in Yantai is currently under construction. Wanhua said in its annual report published in July that construction on the phase-one project will be complete in 2020. The first project includes a 1 MMt/y ethylene unit as well as polyvinyl chloride and linear-low density PE. Wanhua is also building a propylene oxide/styrene monomer plant at Yantai.

As MRC wrote before, China’s top petrochemical maker Wanhua Chemical Group aims to increase LPG imports to about 5.5 million mt in 2020 from 4 million mt this year as it procures feedstock from diversified sources ahead of new projects in Yantai and widens trading activities in Asia.

A 1 million mt/year ethylene integration project - phase two of its petrochemical project in northeast Shandong province - will be the first ethylene cracker to use LPG as feedstock globally and is set for commercial production in the second half of 2020. Together with associated downstream units and a nearby feedstock storage rock cavern with a capacity of 1.2 million cubic meters, the project is costing around Yuan 20 billion.

Ethylene and propylene are feedstocks for producing polyethylene (PE) and polypropylene (PP).

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 1,904,410 tonnes in the first eleven months of 2019, up by 6% year on year. Shipments of all PE grades increased. PE shipments increased from both domestic producers and foreign suppliers. The PP consumption in the Russian market was 1,161,830 tonnes in January-November 2019, up by 7% year on year. Deliveries of all grades of propylene polymers increased, with the homopolymer PP segment accounting for the largest increase.
MRC

MOSCOW (MRC) -- Qatar Petroleum owns 38.1% in the Arabian Refinery Company, which in turn owns 66.6% in Egyptian Refining Company (ERC), reported Gulf Times.

All of the ERC Refinery units are now successfully operating, and are expected to ramp up to full production before the end of the first quarter of 2020, which will reduce Egypt’s dependence on imported petroleum products.
The project will also create job opportunities for the local workforce and will provide a boost to the support services sector in this important region of Egypt.

The successful startup of the ERC refinery will further strengthen Qatar Petroleum’s international downstream footprint through this vital project, which is its largest investment in an Arab country as well as in Africa. The refinery project will support Egypt’s plans to increase the resilience of its domestic hydrocarbon supply chain and reduce dependence on imports.

Qatar Petroleum has participated in this project since 2012, which has cost USD4.4bn with the aim to process around 4.7mn tonnes per year of mainly atmospheric residue feed from the adjacent Cairo Oil Refinery Company.
It will mainly produce Euro V refined products (such as diesel and jet fuel), which are intended for consumption primarily in Cairo and surrounding areas.

As it was informed earlier, China’s top petrochemical maker Wanhua Chemical Group aims to increase LPG imports to about 5.5 million mt in 2020 from 4 million mt this year as it procures feedstock from diversified sources ahead of new projects in Yantai and widens trading activities in Asia.

A 1 million mt/year ethylene integration project - phase two of its petrochemical project in northeast Shandong province - will be the first ethylene cracker to use LPG as feedstock globally and is set for commercial production in the second half of 2020. Together with associated downstream units and a nearby feedstock storage rock cavern with a capacity of 1.2 million cubic meters, the project is costing around Yuan 20 billion.

In view of the said above, Qatar Petroleum signed a 10-year Liquefied Petroleum Gas (LPG) supply agreement with China’s Wanhua Chemicals in mid-November 2019. The agreement is for the sale of approximately 800,000 metric tons per year of LPG over a period of 10 years.

Ethylene and propylene are feedstocks for producing polyethylene (PE) and polypropylene (PP).

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 1,904,410 tonnes in the first eleven months of 2019, up by 6% year on year. Shipments of all PE grades increased. PE shipments increased from both domestic producers and foreign suppliers. The PP consumption in the Russian market was 1,161,830 tonnes in January-November 2019, up by 7% year on year. Deliveries of all grades of propylene polymers increased, with the homopolymer PP segment accounting for the largest increase.
MRC

MOSCOW (MRC) -- Three people were injured in a fire on a platform run by Mexican state oil firm Petroleos Mexicanos (Pemex) on Tuesday, the company said, briefly leading to the evacuation of the rig, said Reuters.

The fire broke out on the Akal-C6 platform in the Sound of Campeche in the southern Gulf of Mexico, Pemex said.

“The incident was confined to the first level on the western side of the platform,” Pemex said on Twitter.

After putting out the fire, the platform was running again within 50 minutes, Pemex said, adding it was operating normally.

As MRC informed previously, Mexican national oil company Pemex is currently processing about 9 percent more crude oil at its domestic refineries than it did in 2017, said Chief Executive Officer Carlos Trevino in April 2018.

Ethylene and propylene are feedstocks for producing polyethylene (PE) and polypropylene (PP).

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 1,724,670 tonnes in the first ten months of 2019, up by 7% year on year. Shipments of all PE grades increased. The estimated PP consumption in the Russian market in January-October 2019 totalled 1,066,520 tonnes, up by 7% year on year. Supply of block copolymers of propylene (PP block copolymer) and homopolymer of propylene (homopolymer PP) increased, demand for statistical copolymers (PP random copolymer) decreased.

Pemex, Mexican Petroleum, is a Mexican state-owned petroleum company. Pemex has a total asset worth of USD415.75 billion, and is the world's second largest non-publicly listed company by total market value, and Latin America's second largest enterprise by annual revenue as of 2009. Company produces such polymers, as polyethylene (PE), polypropylene (PP), polystyrene (PS).
MRC

MOSCOW (MRC) -- Braskem Idesa reached, at the end of 2019, three million tons of polyethylene produced in its petrochemical complex in Nanchital, Veracruz, which began operations three and a half years ago, said Hydrocarbonprocessing.

This event is of great importance for the benefits to the national economy and the development of the petrochemical industry in Mexico, especially in a scenario of challenges for the recovery of the production of raw material that supports the industrial growth of the Country.

Some of the successes of this period are:
• Cumulative production represented import substitution and export generation, with an Impact on the currency balance of 3.4 billion dollars since the inauguration of the plant in 2016.
• In 2019 Braskem Idesa launched the first Mexican high-density polyethylene resin (HDPE) with the content of Post-Consumed Recycled Plastics I?m green Recycled, contributing decisively for the polyethylene to be inserted in a circular economy and more sustainable.
• Generated 800 direct and more than 3,000 indirect, permanent and quality jobs, mostly in the southeast of the country.
• Implemented numerous social, health and safety programs in the communities near its operations benefiting more than 5,000 families in the region.
• Boosts the culture of recycling with the creation and support of a Recycling Cooperative in Nanchital, in addition to installing education programs in 24 primary schools in the region and organizing various events with the aim of promoting responsible consumption of plastic and plastic. Care for the environment.
• An important action was the 4 editions of Plastianguis, an environmental education program adopted by the National Association of the Chemical Industry (ANIQ), with 3 events in Nanchital and an edition at the Faculty of Chemistry of the UNAM in CDMX. With this program, more than 10,000 people have been targeted in the separation and recycling of plastics, in addition to having recovered more than 95 tons of waste that were re-incorporated into the value chain to be recycled.
• In November 2018 Braskem Idesa made public its Global commitment to Circular Economy to ensure that 100% of plastic packaging is reused, recycled or recovered until 2040, strengthening an ecosystem within the polyethylene value chain, generating opportunities and solutions with their customers.

"We are delighted to have reached 3 million tons of polyethylene since our complex opened," said Roberto Velasco, Industrial Director of Braskem Idesa. “This shows that Mexico can compete successfully in an international scenario in the petrochemical sector, and deliver attractive results for shareholders, financial market, community and other interested parties. "

The polyethylene produced is an important raw material used throughout the economy, such as agriculture, packaging, construction and infrastructure, hygiene and cleaning, chemicals, automotive, cosmetics and pharmaceuticals, among others.

The chemical and petrochemical industry is essential for the country's economy. With the production achieved, Braskem Idesa reaffirms its commitment to continue generating quality jobs and economic development for Mexico and will continue in the constant search for solutions for the development of the entire petrochemical sector together with the other participants, such as suppliers, customers, government and society.

Ethylene and propylene are feedstocks for producing polyethylene (PE) and polypropylene (PP).

According to MRC's ScanPlast report, Russia's estimated PE consumption totalled 1,724,670 tonnes in the first ten months of 2019, up by 7% year on year. Shipments of all PE grades increased. The estimated PP consumption in the Russian market in January-October 2019 totalled 1,066,520 tonnes, up by 7% year on year. Supply of block copolymers of propylene (PP block copolymer) and homopolymer of propylene (homopolymer PP) increased, demand for statistical copolymers (PP random copolymer) decreased.

Braskem S.A. produces petrochemicals and generates electricity. The Company produces ethylene, propylene, benzene, toluene, xylenes, butadiene, butene, isoprene, dicyclopentediene, MTBE, caprolactam, ammonium sulfate, cyclohexene, polyethylene theraphtalat, polyethylene, and polyvinyl chloride (PVC).
MRC