London +4420 814 42225
Moscow +7495 543 9194
Kiev +38044 599 2950
info@mrcplast.com

Our Clients

Order Informer

 
Home > News >
 

Ekornes, BASF and VARTDAL PLAST launch new project for high-end design furniture in a move to reduce carbon footprint

November 08/2021

MOSCOW (MRC) - As of November 2021, Ekornes, a Norwegian manufacturer of high-end design furniture, uses  expandable polystyrene (EPS) protective packaging that has a lower carbon footprint than virgin material by safeguarding the same properties. This is achieved by replacing fossil resources with recycled raw materials at the beginning of production. BASF supplies Styropor Ccycled to VARTDAL PLAST, who converts the material into moulded packaging parts for Stressless furniture made by Ekornes, as per BASF's press release.

We are really proud to be the first company to launch this project together with VARTDAL PLAST and BASF with regards to design furniture. We always strive to have the best packaging solution to protect our quality furniture, and Styropor Ccycled offers exactly what we want: same properties as virgin material but at the same time meeting the needs to reduce our carbon footprint, a perfect fit into our sustainability strategy, says Solveig Gaundal, Compliance and CSR Manager at Ekornes.

Due to its manufacturing process, Styropor Ccycled has the same properties as conventional Styropor. This maintains the excellent packaging properties such as outstanding impact absorption and high compressive strength, which are essential for the protection of sophisticated design furniture. In the production of the packaging foams that have become so well-known over the last 70 years, pyrolysis oil replaces fossil raw materials. BASF sources this oil from technology partners who use a thermochemical process called pyrolysis to transform post-consumer plastic waste that would otherwise be used for energy recovery or go to landfill into this secondary raw material. BASF then uses the oil at the very beginning of the value chain to manufacture new plastics and other products.

Since recycled and fossil raw materials are mixed in production and cannot be distinguished from each other, the recycled portion is allocated to Styropor Ccycled using a mass balance approach. Both the allocation process and the product itself, have been certified by an independent auditor. Compared with conventional Styropor, at least 50%  of CO2 is saved in the production of Styropor Ccycled.

Also, for the converter VARTDAL PLAST Styropor Ccycled brings a lot of advantages as the product is identical to virgin material. Therefore, the production process does not have to be adjusted. The company and their products are certified according to the ecoloop certification programme, confirming that for the products 100% recycled material was used as feedstock. We are thrilled to be working together with BASF and Ekornes on this project. This is a testament of our mutual commitment towards a more sustainable future, says Mounir El'Mourabit, product manager at VARTDAL PLAST.

As MRC reported earlier, BASF is strengthening its global catalyst development and helping customers to bring new products faster to the market. As part of this strategy, BASF is building a new pilot plant center at its Ludwigshafen site. The new Catalyst Dv'elopment and Solids Processing Center will serve as a global hub for pilot-scale production and process innovations of chemical catalysts. The new building is scheduled for completion by mid-2024.

We remind that BASF aims is to electrify its production processes for basic chemicals, which are currently based on fossil fuels.

According to MRC"s ScanPlast report,  the total estimated EPS consumption in Russia grew in August 2021 by 15% year on year to 11,650 tonnes. Russia's overall EPS production totalled 8,770 tonnes over the stated month, down by 8% year on year.

BASF is the leading chemical company. It produces a wide range of chemicals, for example solvents, amines, resins, glues, electronic-grade chemicals, industrial gases, basic petrochemicals and inorganic chemicals. The most important customers for this segment are the pharmaceutical, construction, textile and automotive industries.


mrcplast.com
Author:Margaret Volkova
Tags:PS, EPS, injection moulding, furniture, petrochemistry, recikling, BASF, sustainable development, Germany, Norway.
Category:General News
|
| More

Leave a comment

MRC help

 


 All News   News subscribe