Chevron Phillips Chemical begins restart of ethylene unit No 22 at Sweeny cracker

MOSCOW (MRC) -- Nan Ya Plastics has restarted its No 3 monoethylene glycol (MEG) plant, according to Apic-online.

A Polymerupdate source in Taiwan informed that the plant restarted on November 3, 2014. It was under a month-long maintenance turnaround.

Located in Mailiao, Taiwan, the plant has a production capacity of 360,000 mt/year.

As MRC reported earlier, on 7 September 2014, Nan Ya Plastics shut down its No.4 monoethylene glycol (MEG) plant in Taiwan for a one-month maintenance turnaround. Located at Mailiao, Taiwan, the plant has a production capacity of 720,000 mt/year.

We remind that Sinopec Hubei Chemical Fertilizer has started a new MEG plant on February 8, 2014. Initially the plant was scheduled to start commercial production in late 2013. Located at Zhejiang in Hubei province of China, the plant has a production capacity of 200,000 mt/year.

Another Chinese petrochemical producer Hubei Chemical Fertilizer started up a new monoethylene glycol (MEG) plant in late 2013. Located in Hubei, China, the plant has a production capacity of 200,000 tonnes per year.
MRC

MOSCOW (MRC) -- The November contract price of ethylene in Europe was agreed by EUR90/tonne lower compared to October. Nevertheless, despite such a major fall in feedstock prices, European producers intend to limit the decrease in export polyethylene (PE) prices for the CIS countries by EUR20-60/tonne, according to ICIS-MRC Price report.

A slump in oil prices has led to a similar fall in the prices of refined oil products. Thus, the November contract price of ethylene in Europe was agreed by EUR90/tonne below the October level. In their turn, European producers said they had a strong demand from the domestic market and restricted export quota. Therefore, they do not intend to reduce PE prices proportionally to the cuts in ethylene prices.

The import duty on PE for producers from the Gulf countries and Brazil was raised to 6.5% from 1 January 2014 , leading to lower imports to Europe. The weakening of the euro in recent months has made imports even more unprofitable. And European producers managed to completely balance the market by reducing their capacity utilisation.

Low capacity utilisation and strong demand from the domestic market for several months were the cause of limited export quotas of European producers, particularly, for low density polyethylene (LDPE) and pipe grade high density polyethylene (HDPE).

Nnegotiations over November export prices of European PE began this week. Deals for HDPE were negotiated in the range of EUR1,160-1,200/tonne FCA, down by EUR20-40/tonne from October. Deals for LDPE were negotiated in the range of EUR1,200-1,260/tonne FCA, down by EUR40-60/tonne from October.
MRC

MOSCOW (MRC) -- Styron, the global materials company and manufacturer of plastics, latex and rubber, and its affiliate companies have announced price increases of EUR50 Euro per dry metric ton for all Styrene butadiene and acrylic latexes sold into the paper, carpet and performance markets in Europe, Middle East, Africa and India (EMEAI), reported the company on its site.

This increase will be immediately or as contract terms permit.

"Styron is investing considerable resources into developing new technologies for its Latex markets while continuing to focus on maintaining its high level of expertise and service. This price increase is necessary in order to address the significant margin erosion which we have seen since 2008 and to allow us to continue to provide the high quality of products and service our customers receive from Styron," says Jan Muller, Styron Global Business Director, Latex.

As MRC informed earlier, in February 2014, Styron announced that it would be doubling its Solution Styrene Butadiene Rubber (SSBR) production capacity of one train, after reaching an agreement with material supplier JSR, to acquire its current production capacity rights at Styron’s world-scale rubber production hub in Schkopau, Germany.

SSBR is used in producing high performance tires and green tires with lower rolling resistance. Styron’s Schkopau production site currently hosts eight world-scale rubber trains that supply tire customers around the world. Prior to this agreement, JSR held the capacity rights to 50% of one of Styron’s three SSBR production trains in Schkopau.

As a result, as from April 1, 2014 Styron received full capacity rights to this train, enabling it to increase its capabilities to serve the global tire market.

Styron is a leading global materials company and manufacturer of plastics, latex and rubber, dedicated to collaborating with customers to deliver innovative and sustainable solutions. Styron’s technology is used by customers in industries such as home appliances, automotive, building & construction, carpet, consumer electronics, consumer goods, electrical & lighting, medical, packaging, paper & paperboard, rubber goods and tires. Styron had approximately USD5.3 billion in revenue in 2013, with 19 manufacturing sites around the world, and approximately 2,100 employees.
MRC

MOSCOW (MRC) -- Axiall Corp, a maker of chemicals and building products, reported third-quarter net income of USD44.5 million, higher than USD39.0 million in the prior-year quarter, said Nasdaq.

Excluding items, adjusted earnings for the quarter were USD0.72 per share, compared to USD0.97 per share in the year-ago quarter.

Revenue for the quarter grew to USD1.27 billion from USD1.20 billion in the same quarter last year.

Analysts polled by Thomson Reuters projected earnings of $0.60 per share on revenue of USD1.19 billion for the quarter. Analysts' estimates typically exclude special items.

As MRC wrote before, Axiall Corp. considered building a USD3 billion ethane cracker and chemical plant somewhere in Louisiana. Axiall would invest USD1 billion of its own money, while an unnamed partner would put in USD2 billion. The plant could open in 2018, creating 225 permanent jobs.

Axiall Corporation is a leading integrated chemicals and building products company. It is an international manufacturer of chlor-alkali and derivatives, chlorovinyls and aromatics products including chlorine, caustic soda, vinyl chloride monomer, chlorinated solvents, calcium hypochlorite, ethylene dichloride, muriatic acid, phosgene derivatives, polyvinyl chloride, vinyl compounds, acetone, cumene and phenol. It also manufactures vinyl-based building and home improvement products, including window and door profiles, mouldings, siding, pipe and pipe fittings, and decking. Axiall, headquartered in Atlanta, Georgia, has manufacturing facilities located throughout North America and in Asia to provide industry-leading materials and services to customers.
MRC