MOSCOW (MRC) -- ExxonMobil Chemical has lifted its polyethylene allocation for grades produced at its Baton Rouge, Louisiana, plastics facilities, as per Plastemart.
The allocations, which had been in effect since late January, were lifted this week after feedstock ethylene supply improved following last week's restart of the Evangeline Ethylene Pipeline, sources said. ExxonMobil could not immediately be reached for comment.
The 176 mile Evangeline pipeline is capable of transporting more than 1 mln tpa of ethylene from Texas to Louisiana. ExxonMobil operates a 988,000 tpa ethylene cracker in Baton Rouge, but also receives ethylene through the Evangeline Pipeline that is used for its polyethylene production, market sources have said.
The Baton Rouge Polyolefins Plant has an HDPE capacity of 397,000 tpa, with an industry source noting that the plant is a large producer of HDPE blow molding. The Baton Rouge Plastic Plant has an LDPE capacity of more than 467,000 tpa.
As MRC informed earlier, the American Fuel & Petrochemical Manufacturers (AFPM) trade group presented the platinum version of its Distinguished Safety Award on Monday to ExxonMobil Chemical’s polyolefins plant at its complex in Baton Rouge, Louisiana.
ExxonMobil is the largest non-government owned company in the energy industry and produces about 3% of the world's oil and about 2% of the world's energy.
MRC
MOSCOW (MRC) -- HEXPOL Compounding, a leading global provider of elastomer compounds, continues its commitment to rubber compounding in Mexico with the installation of a new, advanced 135 L rubber mixing line, said the company in its press release.
The line will include significant building and infrastructure extensions to the current HEXPOL facility in Queretaro, Mexico, and will cost approximately 9.2M USD. Anticipating customer growth and expanding production needs, HEXPOL is planning ahead. This investment in rubber compounding capacity will support the growing demand from HEXPOL's automotive and engineering customers in Mexico's automotive production corridor, which also includes HEXPOL's plant in Aguascalientes.
"When the new line is operational, we will have six advanced mixing lines with Best-in-Class equipment and technology," explained Tracy Garrison, President and Chief Executive Officer of HEXPOL Compounding. "As our customers grow, we will be prepared to support their continued success."
The new 135 L line is scheduled to be commissioned and on stream sometime in the second half of 2016, and will increase HEXPOL's rubber compounding capacity in Mexico to more than 70,000 tons, strengthening HEXPOL's continued commitment to the Mexican market.
Impressive production growth in the automotive corridor during the past few years has increased compounding demand and strong volume is expected to continue. The new line planned for 2016 is in addition to the second mixing line commissioned at Queretaro this past November, when the facility celebrated 15 years of service to its customers. HEXPOL has been in operation in Mexico longer than any other rubber compounder – since 2000.
As MRC informed earlier, HEXPOL has acquired the US-based rubber compounderPortage Precision Polymers Inc from the founder Doug Hartley and his family in a deal worth about USD13.2 million on a cash and debt free basis.
HEXPOL is a world-leading polymers group with strong global market positions in advanced polymer compounds (Compounding), gaskets for plate heat exchangers (Gaskets) and wheels made of plastic and rubber materials for forklifts and castor wheel applications (Wheels).
MRC
MOSCOW (MRC) -- A. Schulman, Inc., a leading international supplier of high-performance plastics compounds and resins, has announced the appointment of Tony Daponte as the company's first Research & Development Director Masterbatch for the Asia-Pacificregion, reported the producer in its press release.
In this capacity, he will collaborate with the existing application centers in the region and assist in the development of a R&D facility dedicated to harnessing the technical know-how in APAC.
Since 2001, Daponte has served as the company's R&D Director Masterbatch for Europe, Middle East and Africa (EMEA). In this role, he has contributed to the ongoing development of innovative products and value-adding properties that support A. Schulman's diverse solutions portfolio. In 2012, he also was named the Managing Director for the company's facility in Bornem, Belgium.
Bernard Rzepka, President and Chief Executive Officer of A. Schulman stated, "This action aligns with our aim to further develop our R&D capabilities with global and local reach. Our network of Innovation & Collaboration Centers is essential in providing our customers with market-leading technologies thus providing differentiation and value for them."
As MRC wrote before, A. Schulman Inc. plans to spend 5 million to EUR7 mln (USD5.5 mln to USD7.7 mln) on a new masterbatch facility in Turkey, to tap into market growth in the region. The facility, in the greater Istanbul area, will have annual production capacity of about 40 million pounds of the company’s additive, white and breathable masterbatches for the food and industrial packaging markets, the company said. It’s expected to be in production at the end of the Fairlawn, Ohio-based company’s 2016 fiscal year, which closes Aug. 31, 2016.
A. Schulman is a global plastics supplier, headquartered in Akron, Ohio, and a leading international supplier of high-performance plastic compounds and resins, which are used as raw materials in a variety of markets. A. Schulman has 33 manufacturing facilities globally. A. Schulman's fiscal third-quarter earnings fell 69% amid continued sluggishness in European markets and higher-than-expected costs in Latin America, where the company has been consolidating its Brazilian operations. A. Schulman reported net sales of approximately USD2.5 billion for the fiscal year ended August 31, 2014.
MRC
MOSCOW (MRC) -- Quanex Building Products Corporation (Quanex), a leading supplier of window and door components, announced that it has acquired HL Plastics (HL), the United Kingdom’s fastest-growing vinyl profile extruder, in an all-cash transaction valued at approximately USD145 mn, said Realestaterama.
HL complements a subsidiary Quanex owns 40 miles from the newly acquired company in Denby, England, and it helps Quanex enter the window market in Europe.
Quanex bought its subsidiary in England, Edgetech I.G. Inc., for USD107 million back in 2011. Located in Coventry, the business makes insulating glass spacer systems - a key element for energy efficiency - for window and door manufacturers.
HL makes vinyl frames for window manufacturers among other products. Although the two businesses don’t serve the same customers, they serve the same industry. And that’s what prompted Griffiths to move quickly when HL was recently put up for sale.
Quanex bought HL, which is part of Flamstead Holdings Ltd., in an all-cash deal that also includes Wegoma Machinery Sales Ltd. - a maker of PVC and aluminum manufacturing machines for the window fabrication market — and Vintage Windows Ltd., a niche window maker.
With more than USD600 million in sales, Quanex is a leading supplier of window and door components to OEMs but Griffiths said there are no direct synergies with its latest acquisition.
In the United States, Quanex gets roughly a third of its sales from vinyl profile sales, a third from accessories, such as insect screens, and a third from the spacers that go between the double glazing in glass.
HL also sells conservatory roofs, hardware, foam trim products, fencing, decking, water retention barriers and related products. The 40-year-old business had sales of USD101 million in the last 12 months and earnings before interest, taxes, depreciation and amortization (EBITDA) of USD18 million, according to a Quanex presentation filed with the U.S. Securities Exchange Commission.
MRC