MOSCOW (MRC) -- ELIX Polymers, a leading manufacturer of acrylonitrile-butadiene-styrene (ABS) resins and derivatives in Europe with a 40-year track record, has developed a range of specialty grades of ABS and PC/ABS to reduce the squeak that is generated by the contact of plastic parts with other plastic parts, leather, PVC-foil or other products, said the producer in its press release.
These undesirable noises can negatively affect the driver's comfort and the quality impression of a car.
Typical critical Automotive interior parts affected include door handles, seating parts, cup holders, and air vents. However, these newly developed grades may also be suited for other segments such as E&E, white goods or consumer goods.
The new grades were submitted to stick-slip tests at several premium Automotive OEMs according to VDA230-206 at testing machines from Ziegler Instruments with very positive test results: a 10 point scale is used where 10 is the highest risk level. The newly developed ELIX grades managed to score 1 – the lowest risk level. Tests were conducted with different forces (10N, 40N) and speeds (1mm/s and 4mm/s) at several temperatures.
The new grades use ELIX Polymers base polymers: standard ABS, high heat ABS, ABS/PC or PC/ABS - and because their key properties remain the same, this does not affect existing OEM approvals of ELIX grades. Furthermore, as the shrinkage of the materials stays the same, current moulds can be used without further need for modifications.
According to Fabian Herter, Industry Manager Automotive at ELIX Polymers, with these new grades, significant cost savings are possible: "Until now, in many instances, fabrics or grease had to be added afterwards to reduce squeak and rattle. However, this involves additional costs and manual labour - and therefore is not ideal. Now, thanks to these new ELIX grades, we are able to offer a more competitive solution when compared to other resins that are currently available."
Mr Herter added: "This new development is the result of our close partnership with leading OEMs. Together we identified the need to address this issue and we were able to develop tailor-made solutions. This approach is fully in line with our strategy to focus on specialty added-value materials."
As MRC informed earlier, in February 2016, ELIX Polymers unveiled an upgraded version of P2MC as well as new ABS grades to complete the plating portfolio. Target applications for these electroplating grades include radiator grilles, logos, profiles, tailgate handles, and decorative interior parts.
ELIX Polymers is one of the most important manufacturers of ABS resins and derivatives in Europe, with 40 years of experience in engineering plastics and an installed capacity of 180,000/year from their plant in Tarragona (Spain) to the world. The operation starts in 1975, when the Tarragona ABS and SAN production plant was inaugurated.
MRC